Epson LQ 870 User Manual - Page 49
Removing Continuous Paper from the Pull-Tractor, LF/FF, TEAR OFF, LOAD/EJECT
View all Epson LQ 870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Using continuous Paper Adjusting the top-of-form position The top-of-form position is the position the printer feeds the paper to when it loads the paper or performs a form feed. This position is important because it determines where the printing begins on the page. You may need to adjust the top of form to a certain position for printing on ready-made forms. To do this, see Adjusting the loading position on page 3-14. Removing continuous paper from the pull tractor 1. Tear off the printed document or excess paper at the tear-off edge. 2. Hold the LF/FF button to feed the continuous paper forward to be ejected. Note: When you are printing with the pull tractor, do not use the TEAR OFF and LOAD/EJECT buttons. Paper Handling 2-21
Using continuous Paper
Adjusting the top-of-form position
The top-of-form position is the position the printer feeds the
paper to when it loads the paper or performs a form feed. This
position is important because it determines where the printing
begins on the page.
You may need to adjust the top of form to a certain position for
printing on ready-made forms. To do this, see Adjusting the
loading position on page 3-14.
Removing continuous paper from the pull tractor
1.
Tear off the printed document or excess paper at the tear-off
edge.
2.
Hold the
LF/FF
button to feed the continuous paper forward to
be ejected.
Note:
When you are printing with the pull tractor, do not use
the
TEAR OFF
and
LOAD/EJECT
buttons.
Paper Handling
2-21