Epson PowerLite 450W User's Guide - Page 49
Connecting to Video Equipment, Connecting a Composite Video Source
View all Epson PowerLite 450W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Connecting to Video Equipment You can connect several video sources to the projector at the same time. Before starting, look at your video equipment to determine its available video output connections: ■ If your video player has a yellow RCA video output connector, see "Connecting a Composite Video Source" on page 49. ■ If your video player has an S-Video connector, see "Connecting an S-Video Source" on page 50. ■ If your video player has a component video port (three connectors labeled either Y/Cb/Cr or Y/Pb/Pr), see "Connecting a Component Video Source" on page 51. ■ If your video player has an RGB video port, see "Connecting an RGB Video Source" on page 52. After connecting video cables, you may also want to connect an optional audio cable to play sound through the projector; see page 53. Connecting a Composite Video Source 1. If your video cable has an RCA connector, connect it to the yellow video output connector on your player and the yellow Video port on the projector. Video port note If the video cable was not provided with your video device, you can purchase one from an electronics dealer. 2. If you want to play sound through the projector, see page 53 for instructions on connecting an audio cable. Connecting to Computers, USB Devices, and Other Equipment 49