Epson PowerLite 450W User's Guide - Page 84
Configuring the Projector, at the same time and easily trade off control of the projector.
View all Epson PowerLite 450W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Configuring the Projector 1. Press the Menu button, then choose Network and press Enter. 2. Choose Network Configuration and press Enter. 3. Choose Wireless LAN and press Enter. You see this screen: 4. Make sure Wireless LAN Power is set to On. You can turn it off to prevent unauthorized access. 5. Select one of the following connection modes: ■ Quick mode lets you easily connect one computer to the projector at a time. You can also select this setting when you're using the optional Epson Quick Wireless Connection USB key. ■ Advanced mode lets multiple computers access the projector at the same time and easily trade off control of the projector. This method requires a wireless network access point or an AirPort Extreme (or AirPort) base station. 6. If your network is using 802.11a, use the arrow buttons on the remote control to highlight 802.11a, then press Enter to select it. 84 Using the Projector on a Network