Epson PowerLite 450W User's Guide - Page 87
Using Wireless Security Options, Enabling WEP Encryption
View all Epson PowerLite 450W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Using Wireless Security Options The projector includes WEP and WPA data encryption security options which you can enable for network projection. Make sure the settings you select match the ones used by your network; follow the directions from your network administrator. See the following sections to enable security options on your projector: ■ "Enabling WEP Encryption" below ■ "Enabling WPA Security" on page 89 You also need to enable security settings from EasyMP Network Projection (see page 90). Enabling WEP Encryption 1. Press Menu on the projector remote. Highlight Network and then press Enter. 2. Choose Network Configuration and press Enter. 3. Highlight Security, then press Enter. You see the following screen: note The authentication and firewall features are only effective when the access point for the connection destination supports the same functions. 4. Press Enter to select Security, then select WEP and press Enter. Using the Projector on a Network 87