Epson Stylus Photo R2000 Basics - Page 40
ink button to begin charging the ink. This takes about, 1/2 minutes.
View all Epson Stylus Photo R2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
9. Insert the new cartridge into the holder and push it down until it clicks into place. 10. Once you replace all the necessary cartridges, close the cartridge cover and push it down until it clicks into place. 11. Close the printer cover. 12. Press the H ink button to begin charging the ink. This takes about 2 1/2 minutes. The P power light flashes as the ink charges. When the P power light stops flashing and the H ink light goes out, ink charging is finished. Caution: Never turn off the R2000 Series while ink is charging or you'll waste ink. If the H ink light is flashing, press the H ink button, then press down all the cartridges securely. If you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge. 40 Maintaining Your Printer