Epson TM-U950P Specifications - Page 105

ESC f t1 t2 [Name] Set cut sheet wait [Format] [Range] HH 0 £ t1 £ 15 0 £ t2 £ 64 [Description] Sets the time the printer waits for slip paper to be inserted and the time from when the slip is inserted to when the printer starts operation The slip waiting time is t1 ´ 1 minutes. If slip paper is not inserted within this time, the printer cancels slip mode automatically and selects the default paper in ESC c 0. When t1 = 0, the printer waits until slip paper is inserted. The printer starts operation t2 ´ 0.1 seconds after detecting a slip. [Notes] If either t1 or t2 is out of the specified range, this command is ignored and the previously set value is not changed. Using DLE ENQ 3 cancels the slip waiting state. The data in the receive buffer and the print buffer are cleared in this time. For the following notes, assume that ESC c 4 is set to stop printing when the absence of slip paper is detected: If the printer is in paper-end and enters the slip waiting state by feeding a slip with the FEED button, there is no limit on the slip waiting time if the printer is not at the beginning of a line. If the printer is in a paper-end and enters the slip waiting state by attempting to print double-height characters on the last line of the slip, there is no limit on the slip waiting time. When the slip waiting time is set using ESC f t1 t2 and when printing stops because paper-end is enabled using ESC c 4 n, it is desirable to print on the remaining slip paper while checking the slip status using GS r 3. [Default] t1 = 0, t2 = 10 TITLE EPSON TM-U950/U950P Specification (STANDARD) SHEET REVISION NO. NEXT A 7775 SHEET 746