Epson TM-U950P Specifications - Page 95

ESC J n [Name] Print and feed paper [Format] [Range] [Description] HH 0 £ n £ 255 Prints the data in the print buffer and feeds the paper [n ´ (fundamental calculation pitch)] inches [Notes] Sets the print starting position to the beginning of the line. The maximum paper feed amount is 40 inches. If the specified amount exceeds 40 inches, the paper feed amount is automatically set to 40 inches. [Reference] GS P ESC K n [Name] Print and reverse feed [Format] [Range] [Description] HH 0 £ n £ 255 Prints the data in the print buffer and feeds the paper [n ´ (fundamental calculation pitch)] inches in the reverse direction [Notes] Sets the print starting position to the beginning of the line. This command must not be executed continuously more than two times. If n is out of the specified range or if the paper feed amount exceeds 1/6 inch, the printer prints the data and does not feed the paper. If paper gets out of the slip sensor during slip printing, the printer prints the data and does not feed the paper. Paper feeding in the reverse direction causes the following problems: À Paper feed pitch is incorrect. Á Printer noise is louder than normal. Â The paper may rub against the ribbon and become dirty. [Reference] GS P TITLE EPSON TM-U950/U950P Specification (STANDARD) SHEET REVISION NO. NEXT A 6676 SHEET 656