Epson TM-U950P Specifications - Page 93
Epson TM-U950P - B/W Dot-matrix Printer Manual
View all Epson TM-U950P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
ESC ? n [Name] Cancel user-defined characters [Format] [Range] HH 32 £ n £ 126 [Description] Cancels the specified user-defined characters [Notes] This command deletes the defined pattern for the character code specified by n in the selected font. After defined pattern is deleted, the printer prints the same pattern for the internal characters. The printer ignores this command when the value of n is out of the specified range and when the specified character code is not defined. [Reference] ESC &, ESC % ESC @ [Name] Initialize printer [Format] HH [Description] Clears the data in the print buffer and resets the printer mode to the mode in effect when the power was turned on [Notes] The DIP switches are not checked again. The data in the receive buffer remains as is. When this command is executed in slip mode, the printer ejects the slip and switches from slip mode to 2-sheet mode. ESC C n [Name] Set cut sheet eject length [Format] [Range] HH 0 £ n £ 255 [Description] Sets the eject length for slip paper to n lines [Notes] When n = 0, the eject length setting for slip paper is canceled. The specified eject length does not change even if the line spacing changes. The maximum eject length that can be set is 40 inches. If the specified amount exceeds 40 inches, the eject length is automatically set to 40 inches. [Default] n=0 [Reference] FF, ESC 2, ESC 3 TITLE EPSON TM-U950/U950P Specification (STANDARD) SHEET REVISION NO. NEXT A 6654 SHEET 634