Epson TM-U950P Specifications - Page 71

3.11 Print Buffer-full Printing When subsequent data is received after the printer processes one line of data in the print buffer, the printer automatically prints the processed line and feeds the paper by one line. 3.12 Loading the Paper Roll If paper from the paper roll is inserted into the paper path with the printer cover open, the paper is detected by the paper sensor, and receipt and journal paper are fed automatically by approximately 180 mm (7.09") and 270 mm (10.63") respectively. If the amount of paper fed automatically is insufficient, the user can feed additional paper by using the FEED button. 3.13 Paper Jam Removal 1) Around the print head To remove jammed paper from the print head area, loosen the thumb screw on the journal side and remove the print head cover. CAUTION: Since the print head becomes very hot just after printing, remove jammed paper only after the print head cools sufficiently. The carriage moves to the specified position after the printer is reset or paper is fed. Do not touch the carriage. 2) Near the paper feed roller or cutter To remove jammed paper from the paper feed roller or cutter, open the cutter unit by pushing it and the lock lever backward. To close the cutter unit, push the cutter unit lock lever forward to lock it while pushing the cutter unit down gently. Pull in the cutter blade by rotating the cutter manual-operation gear in the direction of the arrow. 3) If the cutter unit is not completely closed, the printer cover cannot be completely closed. 4) Paper from the paper roll can be removed by pulling the paper out while pushing the release lever. TITLE EPSON TM-U950/U950P Specification (STANDARD) SHEET REVISION NO. NEXT A 4447-1 SHEET 446