Epson TM-U950P Specifications - Page 122
Epson TM-U950P - B/W Dot-matrix Printer Manual
View all Epson TM-U950P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Third byte (paper sensor information) Bit Function 0 Journal near-end sensor 1 Receipt near-end sensor 2 Journal sensor 3 Receipt sensor 4 Not used 5 Slip insertion sensor 6 Slip ejection sensor 7 Not used Value 0 1 Paper present No paper Paper present No paper Paper present No paper Paper present No paper Fixed to 0 Paper present No paper Paper present No paper Fixed to 0 Forth byte (paper sensor information) Bit Function 0 Slip selection 1 Slip status 2 Undefined 3 Undefined 4 Not used 5 Undefined 6 Undefined 7 Not used Value 0 1 Selected Not selected Possible to print Impossible to print Fixed to 0 Fixed to 0 Bit 1: It is 0 (possible to print) when paper loading has finished and is 0 when slip ejection is started or when time out. When the slip paper is selected and the printer goes to the slip waiting state: Bits 5 and 6 of the third byte is 1 (no paper) Bits 0 and 1 of the fourth byte are 0 (selected) and 1 (impossible to print) respectively. When the printer goes to the slip ejection waiting with slip selected: Bits 5 and 6 of the third byte are 1 (no paper) and 0 (paper present) respectively Bits 0 and 1 of the fourth byte are 0 (selected) and 1 (impossible to print) respectively. When printing stop due to paper-end is disabled using ESC c 4, bit 1 of the fourth byte (slip status) does not become 1 (impossible to print) even when there is no remaining printing space on the slip. Use GS r 3 to check the remaining printing space on the slip. [Default] n = 0 when DIP SW 2-5 is off, n = 2 when DIP SW 2-5 is on [Reference] DLE EOT, ESC u, ESC v, GS ENQ, GS r, APPENDIX B, APPENDIX F TITLE EPSON TM-U950/U950P Specification (STANDARD) SHEET REVISION NO. NEXT AF 9942 SHEET 913