Epson TM-U950P Specifications - Page 77

6.2 Control Commands LF [Name] Print and line feed [Format] H [Description] Prints the data in the print buffer and feeds one line based on the current line spacing [Note] Sets the print starting position to the beginning of the line. [Reference] ESC 2, ESC 3 FF [Name] Print and eject cut sheet [Format] H [Description] Prints the data in the print buffer and ejects the slip paper [Notes] The command is enabled only when slip paper is selected for printing. Paper ejection continues until the paper is completely ejected. When the slip ejection length has been set by ESC C, the specified length is ejected regardless of the slip ejection sensor. After the slip is ejected, the printer selects paper selected by ESC c 0 as the default. The slip is ejected in the forward direction only. [Reference] ESC c 0, ESC C CR [Name] Print and carriage return [Format] H [Description] When auto line feed is enabled, this command functions in the same way as LF. When auto-line feed is disabled, this command prints the data in the print buffer and does not feed the paper. The setting to enable/disable auto line feed differs for the serial interface model and the parallel interface model. Serial interface model Defined by the position of DIP switch 2-1 when the CR command is executed. Parallel interface model Defined by the position of DIP switch 2-1 when the power is turned on or after the unit is reset. [Reference] LF TITLE EPSON TM-U950/U950P Specification (STANDARD) SHEET REVISION NO. NEXT AF 49 SHEET 48