Epson TM-U950P Specifications - Page 24
Title, Sheet, Revision - tm u950 ribbon
View all Epson TM-U950P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
ù Since the slip ejection sensor uses a reflective photo sensor, do not use paper that has holes or dark portions with low reflection (less than 40% reflection) at the sensor position (refer to Figure 1.8.3). ù Be sure to perform slip printing with a paper roll loaded to avoid incorrect paper feeding due to paper jams. ù Use thinner paper (N30 or equivalent) between the top and bottom sheets of multi-ply paper. If thick paper is used, the copy capability is lowered. 7) Notes on using the MICR reader (only when the printer is used with MICR) ù Be sure to perform personal check printing with a paper roll loaded. If MICR reading and/or printing is performed without a paper roll loaded, the check cannot be fed correctly or may be damaged due to paper jams. ù The personal checks must be flat, without curls, folds, or wrinkles (especially at the edges). Otherwise, the check may rub against the ribbon and become ink-stained. ù Do not insert checks with staples. This may cause paper jams, MICR reading errors, and damage to the MICR head. ù Let go off the check immediately as soon as the printer starts feeding it. Otherwise, the paper is not fed straight, causing paper jams and MICR reading errors. TITLE EPSON TM-U950/U950P Specification (STANDARD) SHEET NO. REVISION AB NEXT 87 SHEET 67-1