Foxconn Inferno Katana English Manual. - Page 22
USB Connectors: F_USB1/2/3, Serial ATA Connectors: SATA_1/2/3/4/5/6, IDE Connector: PIDE, Speaker
View all Foxconn Inferno Katana manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
CAUTION ! We recommend you using an 8-pin ATX 12V power supply. If you are using a 4-pin power supply, you need to align the ATX power connector according to the picture on the right. Connect a 4-pin power plug 2 USB Connectors: F_USB1/2/3 In addition to the eight USB ports on the rear panel, this product also provides three 10-pin USB headers on its motherboard. By connecting through USB cables with them, user can quickly expand another six USB ports on the front panel. 12 VCC DD+ GND EMPTY VCC DD+ GND NC 9 10 F_USB 1/2/3 Serial ATA Connectors: SATA_1/2/3/4/5/6 The Serial ATA connector is used to connect with SATA Hard Disk or CD devices which support this feature. The current Serial ATA II interface allows up to 300MB/s data transfer rate. 1 GND TX+ TXGND RXRX+ GND SATA_1/2/3/4/5/6 IDE Connector: PIDE With the provided Ultra DMA IDE ribbon cable, you can connect to any IDE type of hard disk and CD/ DVD ROM/RW drive. Speaker Connector: SPEAKER The speaker connector is used to connect speaker of the chassis. SPKJ 1 EMPTY 2 NC 3 SPKJ 4 SPEAKER 15 15