Foxconn Inferno Katana English Manual. - Page 45
USB Configuration, ► USB Functions, ► Legacy USB Support, ► USB 2.0 Controller Mode, ► BIOS EHCI Hand - driver
View all Foxconn Inferno Katana manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
USB Configuration CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. USB Configuration USB Configuration Help Item Module Version - 2.24.3-13.4 Options USB Devices Enabled : None USB Functions 14 USB Ports Legacy USB Support Enabled USB 2.0 Controller Mode High Speed BIOS EHCI Hand-Off Enabled Disabled 2 USB Ports 4 USB Ports 6 USB Ports 8 USB Ports 10 USB Ports 12 USB Ports 14 USB Ports 3 Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults USB Configuration ► USB Functions This item is used to enable or disable USB function. ► Legacy USB Support This item is used to enable the support for USB devices on legacy OS. If you have a USB keyboard or mouse, set to auto or enabled. ► USB 2.0 Controller Mode This item is used to set the transmission rate mode of USB 2.0. The available settings are : [High Speed] in 480Mbps; [Full Speed] in 12Mbps. ► BIOS EHCI Hand-Off Windows XP supports a number of features in the Enhanced Host Controller Interface (EHCI) specification, but there are a few features that are not implemented. Microsoft said preliminary support for EHCI BIOS handoff will be available in Windows XP SP2. This item allows you to enable support for OS without EHCI hand-off feature. This is a workaround for OS without EHCI hand-Off support . The EHCI ownership change should claim by EHCI driver. If USB mass devices are connected to the computer, the following item will appear: ► USB Mass Storage Device After pressing , you can set the reset delay for the USB mass storage device. There are many different emulation types of this USB device, such as [Auto], [Floppy], [Forced FDD], [Hard Disk] and [CDROM] can be selected. Select [Auto], USB devices less than 530MB will be emulated as Floppy and remaining as hard drive. [Forced FDD] option can be used to force a HDD formatted drive to boot as FDD(Ex. ZIP drive). 38