Foxconn Inferno Katana English Manual. - Page 55
► 1.8V PLL Voltage Setting - p55
View all Foxconn Inferno Katana manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
ALL Voltage Control CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. ALL Voltage Control ******* CPU Voltages ******* CPU VCore Mode CPU Target Core Voltage CPU VTT (UnCore) Voltage CPU VCore PWM VDroop CPU Fuzzy Equalizer Control Help Item Dynamic Mode Default Options 1.10V Enabled Dynamic mode Disabled Fixed Mode ******* Chipset Voltages******* 1.8V PLL Voltage Setting 1.80V P55 PCH Core Voltage 1.05V ******* Memory Voltages******* DRAM Voltage Setting DIMM1,2 Vref C-Addr DIMM3,4 Vref C-Addr 1.60V 0.80V 0.80V 3 Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► CPU VCore Mode This item is used to select the voltage mode for CPU VCore. Default Value is: [Dynamic Mode]. In fact, dynamic mode means EIST Mode is enabled and the voltage is fixed. ► CPU Target Core Voltage This item shows the CPU target core voltage. ► CPU VTT (UnCore) Voltage This item is used to set CPU VTT Voltage. The maximum voltage available for adjustment is 1260mV, one step is 20mV. Warning: Adjusting the voltage beyond the CPU VTT default voltage could result in damage to the CPU. ► CPU VCore PWM VDroop This item is enable or disable the CPU Vcore Power Mangement Vdroop. Warning: Adjusting this item to [Enabled] could result in damage to the board. ► CPU Fuzzy Equalizer Control This item is enable or disable the CPU Fuzzy Equalizer control. Enable this function, Fuzzy Equalizer will control the CPU power phase. ► 1.8V PLL Voltage Setting This item is used to set CPU PLL (Phase lock loop) Voltage. The default voltage is 1.8V. Warning: Adjusting the voltage beyond the default voltage could result in damage to the board. ► P55 PCH Core Voltage This item is used to set P55 PCH Core Voltage. The default value is: [1.05V]. Warning: Adjusting the voltage beyond the PCH default core voltage could result in damage to the PCH core. ► DRAM Voltage Setting The maximum voltage available for adjustment is 2.86V. Warning: Adjusting the voltage beyond the memories default voltage could result in damage to the memory controller, the default voltage is 1.60V ► DIMM1,2 Vref C-Addr 48