Garmin G500H G500H Cockpit Reference Guide - Page 37
Alt Mode, Below, Normal, Above, Unrest, Standby, Test Mode On Ground
View all Garmin G500H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
MAP GROUP: TRAFFIC PAGE MAP GROUP 2) Press the ALT MODE soft key to change what traffic is displayed. Pressing the BELOW, NORMAL, ABOVE or UNREST soft keys will determine what traffic is displayed. The selection is shown in the Altitude mode field. The values below define what each altitude mode displays, relative to the altitude of the aircraft. Soft Key BELOW NORMAL ABOVE UNREST Description Displays traffic from -9700 to +2700 ft Displays traffic from -2700 to +2700 ft Displays traffic from -2700 to +9700 ft All traffic is displayed (unrestricted) 3) Press the STANDBY soft key to place the system in the Standby mode. NOTE: Some traffic systems will not enter standby mode while airborne. Test Mode (On Ground) 1) While viewing the Traffic Map Page of the Map Page Group, press the MENU button and select Test Mode from the menu. 2) Verify that a traffic message is shown next to the altitude tape on the PFD and that the traffic pop-up is displayed on the MFD. After a few seconds, test mode is exited automatically by the traffic system. Traffic Annunciation Traffic Annunciation on PFD 190-01150-03 Rev B G500H Cockpit Reference Guide 27