Garmin fenix 2 Owner's Manual - Page 6

• Product manuals • Software updates • Map updates • Vehicles, voices, and other extras Setting Up Garmin Express 1 Connect the device to your computer using a USB cable. 2 Go to www.garmin.com/ express. 3 Follow the on-screen instructions. Waypoints, Routes, and Tracks Waypoints Waypoints are locations you record and store in the device. Creating a Waypoint You can save your current location as a waypoint. 1 Hold DOWN. 2 Select an option: • To save the waypoint without changes, select Save. • To make changes to the waypoint, select Edit, make changes to the waypoint, and select Save. Navigating to a Waypoint 1 Select START > Navigate > Waypoints. 2 Select a waypoint. Finding a Waypoint by Name 1 Select START > Navigate > Waypoints > Spell Search. 2 Select UP, DOWN, and START to enter all or part of the waypoint name. 3 Select Done. 4 Select the waypoint. Changing the Search Area 1 Select START > Navigate > Waypoints > Search Near. 2 Select an option: • To search near a waypoint, select Waypoints. • To search near a city, select Cities. • To search near your current location, select Current Loc. Editing a Waypoint Before you can edit a waypoint, you must create a waypoint. 1 Hold MENU. 2 Select User Data > Waypoints. 3 Select a waypoint. 4 Select Edit. 5 Select an item to edit, such as the name. 6 Select UP, DOWN, and START to enter characters. 7 Select Done. Increasing the Accuracy of a Waypoint Location You can refine a waypoint location for more accuracy. When averaging, the device takes several readings at the same location and uses the average value to provide more accuracy. 1 Hold MENU. 2 Select User Data > Waypoints. 3 Select a waypoint. 4 Select Average Loc. . 5 Move to the waypoint location. 6 Select Start. 7 Follow the on-screen instructions. 2 8 When the confidence reaches 100%, select Save. For best results, collect four to eight samples for the waypoint, waiting at least 90 minutes between samples. Projecting a Waypoint You can create a new location by projecting the distance and bearing from your current location to a new location. 1 Hold MENU. 2 Select Tools > Project Waypoint. 3 Follow the on-screen instructions. The projected waypoint is saved with a default name. Deleting a Waypoint 1 Hold MENU. 2 Select User Data > Waypoints. 3 Select a waypoint. 4 Select Delete > Yes. Deleting All Waypoints 1 Hold MENU. 2 Select Settings > System > Reset > All Waypoints. Routes A route is a sequence of waypoints or locations that leads you to your final destination. Creating a Route 1 Hold MENU. 2 Select User Data > Routes > Create New. 3 Select First Point. 4 Select a category. 5 Select the first point on the route. 6 Select Next Point. 7 Repeat steps 4-6 until the route is complete. 8 Select Done to save the route. Editing the Name of a Route 1 Hold MENU. 2 Select User Data > Routes. 3 Select a route. 4 Select Rename. 5 Select UP, DOWN, and START to enter characters. 6 Select Done. Editing a Route 1 Hold MENU. 2 Select User Data > Routes. 3 Select a route. 4 Select Edit. 5 Select a point. 6 Select an option: • To view the point on the map, select Map. • To change the order of the point on the route, select Move Up or Move Down. • To insert an additional point on the route, select Insert. The additional point is inserted before the point you are editing. • To add a point to the end of the route, select Next Point. • To remove the point from the route, select Remove. Viewing a Route on the Map 1 Hold MENU. Waypoints, Routes, and Tracks