Harman Kardon AVR 140 Owners Manual - Page 54

Audio Section

Stereo Mode

Continuous Average Power (FTC)

50 Watts per channel, 20Hz–20kHz,

@ <0.07% THD, both channels driven into 8 ohms

Six-Channel Surround Modes

Power per Individual Channel

Front L&R channels:

40 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

40 Watts @ <0.07% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side, Back) channels:

40 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

100dB

Surround System Adjacent Channel Separation

Pro Logic I/II

40dB

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

@ 1W (+0dB, –3dB)

10Hz –130kHz

High Instantaneous

Current Capability (HCC)

±25 Amps

Transient Intermodulation

Distortion (TIM)

Unmeasurable

Slew Rate

40V/μsec

FM Tuner Section

Frequency Range

87.5–108.0MHz

Usable Sensitivity

IHF 1.3μV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 70dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

Frequency Range

520–1720kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop 500μV

Distortion

1kHz, 50% Mod 0.8%

Selectivity

±10kHz, 30dB

Video Section

Television Format

NTSC

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1Vp-p/75 ohms

Video Frequency Response

(Composite and S-Video)

10Hz–8MHz (–3dB)

Video Frequency Response

(Component Video)

10Hz–50MHz (–3dB)

General

Power Requirement

AC 120V/60Hz

Power Consumption

65W idle, 540W maximum

(6 channels driven)

Dimensions

(Product)

(Shipping)

Width

17-5/16 inches (440mm)

22 inches (559mm)

Height

5-7/8 inches (150mm)

10-1/2 inches (267mm)

Depth

13-3/4 inches (350mm)

18-3/4 inches (476mm)

(Product)

(Shipping)

Weight

24.4 lb (11.1kg)

29 lb (13.2kg)

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon, Power for the Digital Revolution and Logic 7 are registered trademarks, and

is a

trademark, of Harman International Industries, Incorporated.

VMAx is a registered trademark of Harman International Industries, Incorporated, and is an

implementation of Cooper Bauck Transaural Stereo under patent license.

Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license from Dolby Laboratories.

DTS, DTS Surround, DTS-ES, DTS 96/24 and DTS Neo:6 are registered trademarks of DTS, Inc.

Cirrus is a registered trademark of Cirrus Logic, Inc.

SACD is a trademark of Sony Electronics, Inc.

Apple and iPod are registered trademarks, and Shuffle is a trademark, of Apple Computer, Inc.

The

Bridge

TM

54

TECHNICAL SPECIFICATIONS

AVR 140 TECHNICAL SPECIFICATIONS

Please register your product on our Web site at www.harmankardon.com. Note:You’ll need your serial number.

At the same time, you can choose to be notified about our new products and/or special promotions.

AVR 140 TECHNICAL SPECIFICATIONS

Supplied Accessories

The following accessory items are supplied with the AVR 140. If any of these items are missing, please contact Harman Kardon customer service at www.harmankardon.com.

• A system remote control

• An FM wire antenna

• Two covers for front-panel jacks

• Three AAA batteries

• An AM loop antenna