HP 1606 HP StorageWorks B-series Data Center Fabric Manager Enterprise, Profes - Page 17
HP StorageWorks Encryption SAN Switch is not identified as Router when FCR
View all HP 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Accept Changes does not remove the plus or minus sign in Topology/Device Tree The plus and minus signs are not removed in the Topology/Device Tree when Accept Changes is performed after segmenting or merging the switch or end device. HP recommends that you relaunch the client to remove the plus and minus signs. HP StorageWorks Encryption SAN Switch is not identified as Router when FCR and IR license enabled. The HP StorageWorks Encryption SAN switch has FCR enabled and integrated routing license applied, but the Router Configuration dialog box does not list it as a router in the Router Configuration dialog box. So the user cannot configure EX_Ports for the Encryption Switch using DCFM. Error message is not shown for FC Ports when seclevel is set in the switch Once the switches are discovered and seclevel is set in the switch on launching Realtime Graph dialog box, no error message is shown to the user. DCFM is not processing the SNMPv3 traps for Access Gateway switches If the AG switches are registered for SNMPv3 traps and acting as logical AGs, then if there are any changes made from the CLI, the DCFM updates on a lazy polling cycle. DCFM takes a long time to update CNA connected to an FCoE switch in AG mode DCFM is taking more time (2 minutes for small SAN, 15 minutes for Medium SAN, and 30 minutes for large SAN) to update the CNA, which is connected to a Brocade 8000 in AG mode. If the AG switches are registered for SNMPv3 traps and acting as Logical AGs, and you make the CNA online from the CLI, the DCFM updates on a lazy polling cycle. Syslog troubleshooting If the default syslog port number is already in use, no syslog messages are received from the device. Use one of the following procedures (depending on your operating system) to determine which process is running on the Syslog port and to stop the process: • Windows operating systems Finding the process: 1. Open a command window. 2. Type netstat -anb | find /i "514" and press Enter. The process running on port 514 displays, for example, UDP 127:0:0:1:514 *:* 3328. Stopping the process: Type taskkill /F /PID "" and press Enter. For example, kill -9 "" OR 1. Select CTRL + SHIFT + ESC to open Windows Task Manager. 2. Select the Processes tab. 3. Click the PID column header to sort the process by PID. B-series Data Center Fabric Manager Enterprise, Professional Plus, and Professional 17