HP 1606 HP StorageWorks B-series Data Center Fabric Manager Enterprise, Profes - Page 24
SLP on UNIX systems, IP_Address:Port
View all HP 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Use this command to verify that the Management application SMI Agent SLP service is properly running as a Service Agent (SA). Example output: service:service-agent:// 127.0.0.1,65535. • slptool findsrvs service:wbem Use this command to verify that the Management application SMI Agent SLP service is properly advertising its WBEM services. Example outputs: service:wbem:https:// 10.0.1.3:5989,65535 and service:wbem:http://10.0.1.3:5988,65535. This output shows the functionalities of Management application SMI Agent: • Accepts WBEM requests over HTTP using SSL on TCP port 5989 • Accepts WBEM requests over HTTP without SSL on TCP port 5988 • slptool findattrs service:wbem:http:// Use this command to verify that Management application SMI Agent SLP service is properly advertising its WBEM SLP template over the HTTP protocol. Example output: slptool findattrs service:wbem:http://10.0.1.2:5988 NOTE: IP_Address:Port is the IP address and port number that display when you use the slptool findsrvs service:wbem command. • slptool findattrs service:wbem:https://IP_Address:Port Use this command to verify that the Management application SMI Agent SLP service is properly advertising its WBEM SLP template over the HTTPS protocol. Example output: slptool findattrs service:wbem:https://10.0.1.2:5989 SLP on UNIX systems This section describes how to verify the SLP daemon on UNIX systems. SLP file locations on UNIX systems: • SLP log-Management_Application/cimom /cfg/slp.log • SLP daemon-Management_Application/cimom /cfg/slp.conf You can reconfigure the SLP daemon by modifying this file. • SLP register-Management_Application/cimom /cfg/slp.reg You can statically register an application that does not dynamically register with SLP using SLPAPIs by modifying this file. For more information about these files, read the comments contained in them, or go to http://www.openslp.org/doc/html/UsersGuide/index.html. Verifying SLP service installation and operation on UNIX systems To verify: 1. Open a command window. 2. Type % su root and press Enter to become the root user. 3. Type # Management_Application/cimom/bin/slptool findsrvs service:service-agent and then press Enter to verify the SLP service is running as a Service Agent (SA). 24