HP 2000fc Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide - Page 119
Set CLI to use a 30-second timeout, base 2, and no paging., show cli-parameters
View all HP 2000fc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Parameter disk-addressing enclosure-slot| channel-id Description Optional. Sets the format in which drive IDs are shown and must be specified. • enclosure-slot: Drives are shown, and must be specified, with the format enclosureID.drive-slot-number. This is the default. For example, the first drive in the second enclosure (enclosure ID 1) has address 1.0. • channel-id: Drives are shown, and must be specified, by SCSI ID. For example, the first drive in the second enclosure has address 16. Example Set CLI to use a 30-second timeout, base 2, and no paging. # set cli-parameters timeout 30 base 2 pager disabled Success: CLI parameter changed successfully Related Commands ■ "show cli-parameters" on page 164 Chapter 3 Command Descriptions 119
Chapter 3
Command Descriptions
119
Example
Set CLI to use a 30-second timeout, base 2, and no paging.
Related Commands
■
“show cli-parameters” on page 164
disk-addressing
enclosure-slot|
channel-id
Optional. Sets the format in which drive IDs are
shown and must be specified.
•
enclosure-slot
: Drives are shown, and must
be specified, with the format
enclosure-
ID.drive-slot-number
. This is the default.
For example, the first drive in the second enclosure
(enclosure ID 1) has address 1.0.
•
channel-id
: Drives are shown, and must be
specified, by SCSI ID. For example, the first drive
in the second enclosure has address 16.
#
set cli-parameters timeout 30 base 2 pager disabled
Success: CLI parameter changed successfully
Parameter
Description