HP 2000fc Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide - Page 154
set vdisk-spare, Designate the disk drive having ID 5 in the controller enclosure as a vdisk spare
View all HP 2000fc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
set vdisk-spare Description Designates spare disk drives that can be used by a specific virtual disk, and sets the disk drive status to VDISK SP. A vdisk spare can be assigned to RAID 1, 3, 5, 6, 10, and 50 virtual disks, and must have enough capacity to replace the smallest disk drive in the virtual disk. Input set vdisk-spare disks disks vdisk Parameter Description disks disks Specifies up to four disk drives. For the syntax to use, see "Disk Drive Syntax" on page 25. vdisk Specifies the virtual disk by name or serial number. For the syntax to use, see "Virtual Disk Syntax" on page 26. Example Designate the disk drive having ID 5 in the controller enclosure as a vdisk spare for virtual disk VD1. # set vdisk-spare disks 0.5 VD1 Info: Disk 0.5 added to VD1. Success: Command completed successfully Related Commands ■ "show disks" on page 174 ■ "show vdisks" on page 230 154 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008