HP 2000fc Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide - Page 98
rescan, controllers do this automatically. When drives are inserted they are detected after
View all HP 2000fc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
rescan Description This command forces rediscovery of attached disk drives and enclosures. If both Storage Controllers are online, it also forces re-evaluation of the enclosure IDs of attached drive enclosures, so that IDs are assigned based on controller A's enclosure cabling order. A manual rescan may be needed after system power-up to display enclosures in the proper order. A manual rescan is not required to detect when drives are inserted or removed; the controllers do this automatically. When drives are inserted they are detected after a short delay, which allows the drives to spin up. When you perform a manual rescan, it temporarily pauses all I/O processes, then resumes normal operation. Input rescan Example Scan for device changes and re-evaluate enclosure IDs. # rescan Success: Command completed successfully 98 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008