HP 2000fc Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide - Page 129
set global-spare, delete global-spare
View all HP 2000fc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
set global-spare Description Designates spare disk drives that can be used by any virtual disk. Sets the disk drive status to global-spare. For the command to succeed, you must specify disk drives that are large enough to protect existing virtual disks. You can designate a maximum of eight global spares for the system. Input set global-spare disks disks Parameter Description disks disks Specifies the disk drives. For the syntax to use, see "Disk Drive Syntax" on page 25. Example Designate the disk drive having ID 5 in the controller enclosure as a global spare. # set global-spare disks 0.5 Info: Disk 0.5 configured as a Global Spare. Success: Command completed successfully Related Commands ■ "delete global-spare" on page 73 ■ "show disks" on page 174 Chapter 3 Command Descriptions 129