HP 2000fc Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide - Page 120
set controller-date, Optional. Enables use of Network Time Protocol
View all HP 2000fc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
set controller-date Description Sets the date and time of the Management Controller and then updates the date and time for each RAID controller. Input set controller-date jan|feb|mar|apr|may|jun|jul|aug|sep|oct |nov|dec day hh:mm:ss year time-zone [ntp enabled|disabled] [ntpaddress IP-address] Parameter Description jan|feb|mar|apr|may|jun Specifies the month. |jul|aug|sep|oct|nov|dec day Specifies the day number (1-31). hh:mm:ss Specifies the hour on a 24-hour clock (0-23), the minute (0-59), and the seconds (0-59). year Specifies the year as a four-digit number. time-zone Specifies the system's time zone based on an offset from Universal Time (UT) in hours. For information about time-zone offsets, see http://wikipedia.org. ntp enabled|disabled Optional. Enables use of Network Time Protocol (NTP). If an NTP server is available, the controller's time is synchronized with the server. When enabling NTP you must specify all the parameters but only the ntpaddress and time-zone parameters must be set accurately; the other parameters are ignored. ntpaddress IP-address Optional. Specifies the network address of an available NTP server. If specified, the controller queries this server to get the current time and date. If 255.255.255.255 is set instead of a specific NTP server IP address, the controller listens for time messages from an NTP server set to broadcast mode. 120 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008