HP 2000fc Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide - Page 54
create master-volume, Create the 1-Gbyte master volume MV1 on virtual disk VD1, and associates it
View all HP 2000fc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
create master-volume Description Creates a volume on a specified virtual disk, enables the volume for snapshots, and associates it with an existing snap pool. The volume and snap pool must be owned by the same controller. Input create master-volume vdisk vdisk size sizeMB|GB|TB snap-pool volume [lun LUN] name Parameter Description vdisk vdisk Specifies the virtual disk by name or serial number. For the syntax to use, see "Virtual Disk Syntax" on page 26. size sizeMB|GB|TB Specifies the volume size in MB (Mbyte), GB (Gbyte), or TB (Tbyte). The size uses base 10 (multiples of 1000) or base 2 (multiples of 1024); to see the current base setting, type show cli-parameters. snap-pool volume Specifies the snap pool volume by its name or serial number. For the syntax to use, see "Volume Syntax" on page 26. lun LUN Optional. Specifies a logical unit number to assign to the new master volume. If this parameter is omitted, no LUN is assigned. name Specifies a name for the new master volume. For the syntax to use, see "Volume Syntax" on page 26. Example Create the 1-Gbyte master volume MV1 on virtual disk VD1, and associates it with snap pool SP1. # create master-volume vdisk VD1 size 1GB snap-pool SP1 MV1 Success: Master Volume Created. 54 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008