HP 2000fc Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide - Page 135
set iscsi-parameters, Internet Storage Name Service server, which provides
View all HP 2000fc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
set iscsi-parameters Description iSCSI only. Changes system-wide iSCSI parameters. Input set iscsi-parameters [chap enabled|disabled] [jumbo-frame enabled|disabled] [speed auto|1g] [isns enabled|disabled] [isns-ip iSNS-IP] [isns-alt-ip iSNS-IP] Parameter Description chap enabled|disabled Enables or disables use of Challenge Handshake Authentication Protocol. Disabled by default. jumbo-frame enabled|disabled Enables or disables support for jumbo frames. Disabled by default. A normal frame can contain 1500 bytes whereas a jumbo frame can contain a maximum of 9000 bytes for larger data transfers. speed auto|1g Sets the host port link speed either to auto, which allows the system to negotiate the proper speed, or to 1 Gbit/sec (1g). The default is auto. isns enabled|disabled Enables or disables registration with a specified Internet Storage Name Service server, which provides name-to-IP-address mapping. Disabled by default. isns-ip iSNS-IP Specifies the IP address of an iSNS server. The default address is all zeroes. isns-alt-ip iSNS-IP Optional. Specifies the IP address of an alternate iSNS server, which can be on a different subnet. The default address is all zeroes. Example For a storage system whose host ports are connected to different subnets, enable CHAP, specify the IP address of the iSNS server on each subnet, and enable registration with either server. # set iscsi-parameters chap enabled isns enabled isns-ip 10.10.10.93 isns-alt-ip 10.11.10.90 Chapter 3 Command Descriptions 135