HP 3PAR StoreServ 7400 2-node HP 3PAR StoreServ 7000 Storage Service Guide - Page 11

Removing a 2.5 inch Disk, the LED status of the Drive Enclosure Cage. See

Get HP 3PAR StoreServ 7400 2-node PDF manuals and user guides View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

4. In the Locate Cage dialog box, enter an appropriate time to allow service personnel to view the LED status of the Drive Enclosure (Cage). See Figure 9 (page 11). NOTE: If necessary, use the Stop Locate icon to halt LED flashing. Figure 9 Locate Cage Dialog Box An icon with a flashing LED will be shown next to the cage, which flashes all drives in this cage except the failed drive. Removing a 2.5 inch Disk 1. Pinch the handle latch to release the handle into open position. 2. Pull the handle away from the enclosure and wait 30 seconds. 3. Gently slide the disk drive out of the enclosure and set aside. 4. Remove the replacement disk drive from its packaging. To reinstall a new disk drive, see "Installing a Disk Drive" (page 12). Figure 10 7200 and 7400 Two Node System (HP M6710 Drive Enclosure) Removing a 3.5 inch Disk To remove a 3.5 inch disk drive: 1. Pinch the latch in the handle towards the hinge to release the handle. 2. Gently pull the disk drive one inch and wait 30 seconds. 3. Slide the disk drive out of the enclosure and set aside. 4. To reinstall a new disk drive, see "Installing a Disk Drive" (page 12). Disk Drive Repair 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
4.
In the Locate Cage dialog box, enter an appropriate time to allow service personnel to view
the LED status of the Drive Enclosure (Cage). See
Figure 9 (page 11)
.
NOTE:
If necessary, use the
Stop Locate
icon to halt LED flashing.
Figure 9 Locate Cage Dialog Box
An icon with a flashing LED will be shown next to the cage, which flashes all drives in this
cage except the failed drive.
Removing a 2.5 inch Disk
1.
Pinch the handle latch to release the handle into open position.
2.
Pull the handle away from the enclosure and wait 30 seconds.
3.
Gently slide the disk drive out of the enclosure and set aside.
4.
Remove the replacement disk drive from its packaging. To reinstall a new disk drive, see
“Installing a Disk Drive” (page 12)
.
Figure 10 7200 and 7400 Two Node System (HP M6710 Drive Enclosure)
Removing a 3.5 inch Disk
To remove a 3.5 inch disk drive:
1.
Pinch the latch in the handle towards the hinge to release the handle.
2.
Gently pull the disk drive one inch and wait 30 seconds.
3.
Slide the disk drive out of the enclosure and set aside.
4.
To reinstall a new disk drive, see
“Installing a Disk Drive” (page 12)
.
Disk Drive Repair
11