HP 3PAR StoreServ 7400 2-node HP 3PAR StoreServ 7000 Storage Service Guide - Page 29
State, Open the HP 3PAR Management Console, Summary, Connected, Device Type, showport -sfp, Loss Sync
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
- - 1:1:1 target ready 2FF70002AC0185A6 21110002AC0185A6 host FC - - - 1:1:2 target ready 2FF70002AC0185A6 21120002AC0185A6 host FC - - - 1:2:1 initiator loss_sync 2FF70002AC0185A6 21210002AC0185A6 free FC - - - 1:2:2 initiator loss_sync 2FF70002AC0185A6 21220002AC0185A6 free FC - - - 1:2:3 initiator loss_sync 2FF70002AC0185A6 21230002AC0185A6 free FC - - - 1:2:4 initiator loss_sync 2FF70002AC0185A6 21240002AC0185A6 free FC - - - 1:3:1 peer offline - 0002AC8004BD rcip IP RCIP1 - - • showport -sfp to verify that the replaced SFP is connected and the State is listed as OK: cli% showport -sfp N:S:P -State- -Manufacturer- MaxSpeed(Gbps) TXDisable TXFault RXLoss DDM 0:1:1 OK HP-F 8.5 No No No Yes 0:1:2 OK HP-F 8.5 No No No Yes 0:2:1 OK AVAGO 10.3 No No Yes Yes 0:2:2 OK AVAGO 10.3 No No Yes Yes 1:1:1 OK HP-F 8.5 No No No Yes 1:1:2 OK HP-F 8.5 No No No Yes 1:2:1 OK HP-F 8.5 No No Yes Yes 1:2:2 OK HP-F 8.5 No No Yes Yes 1:2:3 OK HP-F 8.5 No No Yes Yes 1:2:4 OK HP-F 8.5 No No Yes Yes Open the HP 3PAR Management Console 1. Under the Systems tree in the left panel, select the storage system to be serviced to connect. 2. On the Summary tab, click the Port link to open the port's tab. 3. Verify that State is listed as Loss Sync, the Mode is listed as Initiator, and the Connected Device Type is listed as Free. Figure 26 Port details 4. Contact HP Support for further verification. SFP Repair 29