HP 3PAR StoreServ 7400 2-node HP 3PAR StoreServ 7000 Storage Service Guide - Page 49
Adding a Storage System to the Service Processor
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
4. When prompted to update the SP, verify that the software version is correct. Type y and press Enter to continue with the update process. Mounting CDROM... Using spinstaller from /sp/sw/sp/2.5.1.GA-15/ tpdSPInFormOS3.1.2.226-3.1.2.226-12.i386.rpm Do You wish to update the SP from /mnt/cdrom? (y or n) y 5. When the installation process completes, the SPMaint main menu reappears. To verify the current software versions after installation, type 1 for SP Control/Status. 1 SP Main 3PAR Service Processor Menu Transfer media: ethernet Transfer status: Ok Enter Control-C at any time to abort this process 1 ==> SP Control/Status 2 ==> Network Configuration 3 ==> InServ Configuration Management 4 ==> InServ Product Maintenance 5 ==> Local Notification Configuration 6 ==> Site Authentication Key Manipulation 7 ==> Interactive CLI for an InServ X Exit 1 6. Type 1 for Display SP Version to verify installation is complete. 1.1 Display SP Version SP Software Version SP-2.5.1.GA-15 SP Base Image Version: 3.1-8 SP Version: 2.5.1.GA-15 SP Patches: InFormOS release (3.1.2): 3.1.2.226 More detail is available in the latest SPLOR or spconfig data. Press to continue Continue to "Adding a Storage System to the Service Processor" (page 49). Adding a Storage System to the Service Processor After successfully completing the Service Processor Setup Wizard, you must add the storage system to the configuration database of the SP. Adding the storage system permits the SP to communicate, service, and monitor the health of the system. Adding a Storage System to the Service Processor 49