HP 3PAR StoreServ 7400 2-node HP 3PAR StoreServ 7000 Storage Service Guide - Page 36
Ethernet LEDs, Node FC and CNA Port LEDs, Fibre Channel Adapter LEDs, Converged Network Adapter LEDs
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Ethernet LEDs The controller node has two built-in Ethernet ports and each includes two LEDs (see Table 7 (page 36)). Table 7 Ethernet LEDs Left Link Up Speed Right Activity Green Amber Green On On Off On Off Flashing 1 Gbe Link 100 Mbit Link No link established or 10 Mbit Link No link activity No link established Link activity Node FC and CNA Port LEDs The controller node has two FC ports; each includes two LEDs. The arrow head-shaped LEDs point to the port they are associated with. NOTE: Incorrectly configured interconnect cables illuminate amber port LEDs. Table 8 FC Port LEDs All ports FC-1 FC-2 No light Amber Green Off Off 3 fast blinks 4 fast blinks On Flashing Wake up failure (dead device) or power is not applied Not connected Connected at 4GB/sec. Connected at 8GB/sec. Normal/Connected - link up Link down or nor connected Fibre Channel Adapter LEDs Table 9 FC Adapter LEDs All ports Port speed Link status No light Off Amber Green Off 3 fast blinks 4 fast blinks On Flashing Wake up failure (dead device) or power is not applied Not connected Connected at 4GB/sec. Connected at 4GB/sec. Normal/Connected - link up Link down or not connected Converged Network Adapter LEDs Table 10 CNA LEDs Upper Link Lower ACT (Activity) Green Green Off Link down On Link up Off No activity On Activity 36 Understanding LED Indicator Status