HP 3PAR StoreServ 7450 2-node HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 27
Con Multipath I/O (MPIO), Install and Start Host Explorer, Troubleshooting Task Completion
View all HP 3PAR StoreServ 7450 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Even if you can configure and validate only one Fibre Channel connection, you can still configure the Fibre Channel host. CAUTION: If you are using only one supported Fibre Channel connection and that connection fails, the host will not be able to access (read from or write data to) the HP 3PAR storage system. The redundancy of two Fibre Channel connections, each connected to a different HP 3PAR StoreServ Storage system node, creates connection stability and allows for future rolling upgrades to the HP 3PAR storage system. NOTE: To configure more than two Fibre Channel connections, use the HP 3PAR Management Console. To install the Management Console, go to SmartStart wizard step 6, Install the Management Console. 3. Click Next. Configure Multipath I/O (MPIO) Multipath I/O (MPIO) helps ensure the stability of the connection between the host and HP 3PAR StoreServ Storage systems. To configure MPIO: 1. Click Configure. 2. If the wizard displays the Reboot when finished check box, click to select it. In order to complete this MPIO configuration, the wizard will reboot the host system at the end of the iSCSI host configuration process. NOTE: If the MPIO device ID is already configured on the host system, the wizard does not display the Reboot when finished check box. 3. Click Next. Troubleshooting Task Completion If SmartStart displays the Failed to validate whether the current Windows task is complete message, click Configure again. If the problem persists, contact HP support. For more information, see "Support and Other Resources" (page 57). Install and Start Host Explorer Host Explorer helps you discover and manage host system paths. Installation is optional. If you do not install Host Explorer, you must manually manage host paths. For more information, see "The Host Explorer Software Agent" (page 44). NOTE: Host Explorer is not available for Windows Server 2012 systems at this time. To install HP 3PAR Host Explorer: 1. Click Install. 2. Click Next. Configure the Fibre Channel Host 27