HP 550 HP 550 Notebook PC - Maintenance and Service Guide - Page 60
Speaker, from the system board.
View all HP 550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Speaker Description Speaker Spare part number 456593-001 Before removing the speaker, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the keyboard (see Keyboard on page 49). 6. Remove the switch cover (see Switch cover on page 46). Remove the speaker: 1. Disconnect the speaker cable (1) from the system board. 2. Remove the two Torx T8M2.5×4.0 screws (2) that secure the speaker to the top cover. 3. Remove the speaker (3) from the top cover. Reverse this procedure to install the speaker. 52 Chapter 4 Removal and replacement procedures