HP 550 HP 550 Notebook PC - Maintenance and Service Guide - Page 86
ExpressCard assembly, Hard drive see
View all HP 550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
2. Remove the RTC battery from the socket on the system board. Reverse this procedure to install the RTC battery. ExpressCard assembly NOTE: All system board spare part kits include the ExpressCard assembly. Before removing the ExpressCard assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the following components: a. Hard drive (see Hard drive on page 39) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 49) d. Switch cover (see Switch cover on page 46) e. Speaker (see Speaker on page 52) f. Display lid switch module (see Display lid switch module on page 53) g. Display assembly (see Display assembly on page 54) h. Top cover (see Top cover on page 59) i. System board (see System board on page 65) 78 Chapter 4 Removal and replacement procedures