HP 550 HP 550 Notebook PC - Maintenance and Service Guide - Page 79
Heat sink
View all HP 550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Heat sink NOTE: The heat sink spare part kits include replacement thermal material. Description Heat sink (includes replacement thermal material) Spare part number 456605-001 Before removing the heat sink, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the following components: a. Hard drive (see Hard drive on page 39) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 49) d. Switch cover (see Switch cover on page 46) e. Speaker (see Speaker on page 52) f. Display lid switch module (see Display lid switch module on page 53) g. Display assembly (see Display assembly on page 54) h. Top cover (see Top cover on page 59) i. System board (see System board on page 65) Remove the heat sink: 1. Turn the system board upside down, with the USB connectors toward you. 2. Following the 1, 2, 3, 4 sequence stamped into the heat sink, loosen the four Phillips PM2.5×10.0 screws (1) that secure the heat sink to the system board. Component replacement procedures 71