HP 600 HP StorageWorks 600 Modular Disk System Maintenance and Service Guide - Page 55
Rear panel components
View all HP 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Item 1 2 3 4 Description Hard drive LEDs Drive locate mode (UID LED is flashing) UID button/LED Internal Health LED GSI LED Status Green = The drive has been selected by a management application and it is operating normally. Flashing amber (1 Hz) = The drive is not selected and is indicating a predictive failure. Flashing amber/green = The drive has been selected by a management application and is indicating a predictive failure. Amber = The drive might or might not be selected and is indicating drive failure, link failure, or mismatched configuration. Off = The drive is not selected. Blue = UID LED is enabled from the UID button Blue flashing = Item 1 is in locate mode Off = UID LED is disabled Green = System health is good Off = System is off Amber = Enclosure requires service check: I/O, fan and power supply LEDs, and AC power cables to power supplies. Off = Enclosure is functioning normally. Rear panel components The figure shows a maximum configuration. Your enclosure might appear differently, for example, containing power supply or I/O module blanks, depending on the configuration that was ordered. Item Description 1 Power supply 1 Component identification 55