HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 1202

Call Home Message Level Feature Chapter 64 Configuring Call Home Send documentation comments to [email protected] You see the User Defined Command information shown in Figure 64-7. Figure 64-7 User Defined Command Dialog Box Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Step 10 Click the Create Row icon. Check the check boxes in front of the switches from which you want to receive alerts. Select the alert group type from the Alert Group Type drop-down list. Select the ID (1-5) of the CLI command. The ID is used to keep track of the messages. Enter the CLI show command in the CLI Command field. Click Create. Repeat Steps 3-7 for each command you want to associate with the profile. Click Close to close the dialog box. Call Home Message Level Feature The Call Home message level feature allows you to filter messages based on their level of urgency. Each destination profile (predefined and user-defined) is associated with a Call Home message level threshold. Any message with a value lower that the urgency threshold is not sent. The urgency level ranges from 0 (lowest level of urgency) to 9 (highest level of urgency), and the default is 0 (all messages are sent). Note Call Home severity levels are not the same as system message logging severity levels. To set the message level for each destination profile for Call Home using Fabric Manager, follow these steps: Step 1 Step 2 In Fabric Manager, expand the Switches folder in the Physical Attributes pane, expand Events then select Call Home. You see the Call Home information in the Information pane. In Device Manager, choose Admin > Events > Call Home. Click the Profiles tab in the Information Pane. You see the Call Home profiles shown in Figure 64-8. 64-8 Cisco MDS 9000 Family CLI Configuration Guide OL-16184-01, Cisco MDS SAN-OS Release 3.x