HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 762

Creating and Modifying Users Chapter 40 Configuring SNMP Send documentation comments to [email protected] Step 1 Step 2 Step 3 Step 4 Select a VSAN in the Logical Domains pane. This will not work if you select All VSANS. Expand Switches > Security and then select Users and Roles in the Physical Attributes pane. Click the Global tab in the Information pane. Check the GlobalEnforcePriv check box. Click the Apply Changes icon to save these changes. Assigning SNMPv3 Users to Multiple Roles The SNMP server user configuration is enhanced to accommodate multiple roles (groups) for SNMPv3 users. After the initial SNMPv3 user creation, you can map additional roles for the user. Note Only users belonging to a network-admin role can assign roles to other users. To add multiple roles to a new user using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Expand Switches > Security and then select Users and Roles from the Physical Attributes pane. Click the Users tab in the Information pane to see a list of users like the one in Figure 40-2. Click Create Row. You see the Create Users dialog box shown in Figure 40-4. Figure 40-4 Create Users Dialog Box Step 4 Step 5 Choose roles using the check boxes. Choose an option for Digest and one for Encryption. 40-6 Cisco MDS 9000 Family CLI Configuration Guide OL-16184-01, Cisco MDS SAN-OS Release 3.x