HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 1209

Chapter 64 Configuring Call Home Call Home Configuration Distribution Send documentation comments to [email protected] Figure 64-15 Call Home CFS Tab Step 4 Step 5 Step 6 Select a switch in the Information pane. Select Enable from the drop-down list in the Admin column in the row for that switch. Click the Apply Changes icon to commit the changes. Fabric Lock Override If you have performed a Call Home task and have forgotten to release the lock by either committing or discarding the changes, an administrator can release the lock from any switch in the fabric. If the administrator performs this task, your changes to the pending database are discarded and the fabric lock is released. Tip The changes are only available in the volatile directory and are subject to being discarded if the switch is restarted. Database Merge Guidelines See the "CFS Merge Support" section on page 13-9 for detailed concepts. When merging two Call Home databases, follow these guidelines: • Be aware that the merged database contains the following information: - A superset of all the destination profiles from the dominant and subordinate switches take part in the merge protocol. - The e-mail addresses and alert groups for the destination profiles. - Other configuration information (for example, message throttling, periodic inventory) from the switch that existed in the dominant switch before the merge. • Verify that two destination profiles do not have the same name (even if they have different configuration information) on the subordinate and dominant switches. If they do contain the same name, the merge operation will fail. You must then modify or delete the conflicting destination profile on the required switch. OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 64-15