HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 763

Chapter 40 Configuring SNMP Creating and Modifying Users Send documentation comments to [email protected] Step 6 Step 7 Optionally provide an expiration date for the user and the file name of an SSH key. Click Create to create the new roles. Adding Communities You can configure read-only or read-write access for SNMPv1 and SNMPv2 users. Refer to RFC 2576. To create an SNMPv1 or SNMPv2c community string using Fabric Manager, follow these steps: Step 1 Step 2 Expand Switches > Security and then select Users and Roles from the Physical Attributes pane. Click the Communities tab in the Information pane. You see the existing communities (see Figure 40-5). Figure 40-5 Communities Tab Under Users and Roles Step 3 Step 4 Step 5 Step 6 Click Create Row. You see the Create Community String dialog box. Check the Switch check boxes to specify one or more switches. Enter the community name in the Community field. Select the role from Role drop-down list. Note You can enter a new role name in the field if you do not want to select one from the drop-down list. If you do this, you must go back and configure this role appropriately (see the "Role-Based Authorization" section on page 39-1). Step 7 Click Create to create the new entry. Deleting a Community String To delete a community string using Fabric Manager, follow these steps: Step 1 Expand Switches > Security and then select Users and Roles from the Physical Attributes pane. Step 2 Click the Communities tab in the Information pane. OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 40-7