HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 998

Configuring iSCSI Chapter 50 Configuring iSCSI Send documentation comments to [email protected] Advertising Static iSCSI Targets You can limit the Gigabit Ethernet interfaces through which static iSCSI targets are advertised. By default iSCSI targets are advertised on all Gigabit Ethernet interfaces, subinterfaces, PortChannel interfaces, and PortChannel subinterfaces. To configure a specific interface that should advertise the iSCSI virtual target using Device Manager, follow these steps: Step 1 Step 2 Step 3 Step 4 Step 5 Click IP > iSCSI. You see the iSCSI Configuration (see Figure 50-10). Click the Targets tab to display a list of existing iSCSI targets (see Figure 50-11). Right-Click the iSCSI target that you want to modify and click Edit Advertised. You see the Advertised Interfaces dialog box. (Optional) Right-click on an interface that you want to delete and select Delete. (Optional) Click Create to advertise on more interfaces. You see the Create Advertised Interfaces dialog box. iSCSI Virtual Target Configuration Examples This section provides three examples of iSCSI virtual target configurations. Example 1 This example assigns the whole Fibre Channel target as an iSCSI virtual target. All LUNs that are part of the Fibre Channel target are available as part of the iSCSI target (see Figure 50-14). Figure 50-14 Assigning iSCSI Node Names iSCSI view of storage device iqn.1987-02.com.cisco.target-1 1 2 3 4 5 6 Fibre Channel storage device 1 2 3 pWWN 28:00:01:02:03:04:05:06 4 5 6 112189 iscsi virtual-target name iqn.1987-02.com.cisco.target-1 pWWN 28:00:01:02:03:04:05:06 Example 2 This example maps a subset of LUNs of a Fibre Channel target to three iSCSI virtual targets. Each iSCSI target only has one LUN (see Figure 50-15). 50-12 Cisco MDS 9000 Family CLI Configuration Guide OL-16184-01, Cisco MDS SAN-OS Release 3.x