HP Cisco MDS 9120 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 1260

Analyzing the Results of Merging Zones Chapter 68 Troubleshooting Your Fabric Send documentation comments to [email protected] Step 2 Step 3 Step 4 Step 5 You see the Trace Route dialog box. Select the source switch from the Source Switch drop-down list. Select the VSAN for which to verify connectivity from the VSAN drop-down list. Select the target end port for which to verify connectivity from the Target Endport drop-down list. Click Start to perform the traceroute between your switch and the selected port. You see the results at the bottom of the dialog box as shown in Figure 68-5. Figure 68-5 Successful Trace Route Results Step 6 Click Clear to clear the contents of the window and perform another traceroute, or click Close to close the window. Analyzing the Results of Merging Zones You can use the Zone Merge option on the Zone menu to determine if two connected switches have compatible zone configurations. To use the Zone Merge option in Fabric Manager to determine zone configuration compatibility, follow these steps: Step 1 Step 2 Step 3 Step 4 Step 5 Choose Zone > Merge Analysis. You see the Zone Merge Analysis dialog box. Select a switch from each drop-down list. Select the VSAN for which you want to perform the zone merge analysis. Repeat Step 3 as needed. Click Analyze. The Zone Merge Analysis window displays any inconsistencies between the zone configuration of the two selected switches as shown in Figure 68-6. 68-8 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-8007-10, Cisco MDS SAN-OS Release 3.x