HP Cisco MDS 9216 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 242

switchport mode private-vlan host Chapter 2 Ethernet Commands Send comments to [email protected] switchport mode private-vlan host To set the interface type to be a host port for a private VLAN, use the switchport mode private-vlan host command. switchport mode private-vlan host Syntax Description This command has no arguments or keywords. Command Default None Command Modes Interface configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines When you configure a port as a host private VLAN port and one of the following applies, the port becomes inactive: • The port does not have a valid private VLAN association configured. • The port is a Switched Port Analyzer (SPAN) destination. • The private VLAN association is suspended. If you delete a private VLAN port association, or if you configure a private port as a SPAN destination, the deleted private VLAN port association or the private port that is configured as a SPAN destination, that port becomes inactive. Note We recommend that you enable spanning tree BPDU Guard on all private VLAN host ports. Examples This example shows how to set a port to host mode for private VLANs: switch(config-if)# switchport mode private-vlan host Related Commands Command show interface switchport Description Displays information on all interfaces configured as switch ports. 2-94 Cisco Nexus 5000 Series Command Reference OL-16599-01