HP Cisco MDS 9216 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 347
deadtime
View all HP Cisco MDS 9216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 347 highlights
Chapter 6 Security Commands deadtime Send comments to [email protected] deadtime To configure the dead-time interval for a RADIUS or TACACS+ server group, use the deadtime command. To revert to the default, use the no form of this command. deadtime minutes no deadtime minutes Syntax Description minutes Number of minutes for the interval. The range is from 0 to 1440 minutes. Setting the dead-time interval to 0 disables the timer. Command Default 0 minutes. Command Modes RADlUS server group configuration TACACS+ server group configuration Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines You must use the feature tacacs+ command before you configure TACACS. Examples This example shows how to set the dead-time interval to 2 minutes for a RADIUS server group: switch(config)# aaa group server radius RadServer switch(config-radius)# deadtime 2 This example shows how to set the dead-time interval to 5 minutes for a TACACS+ server group: switch(config)# aaa group server tacacs+ TacServer switch(config-tacacs+)# deadtime 5 This example shows how to revert to the dead-time interval default: switch(config)# aaa group server tacacs+ TacServer switch(config-tacacs+)# no deadtime 5 Related Commands Command aaa group server feature tacacs+ radius-server host Description Configures AAA server groups. Enables TACACS+. Configures a RADIUS server. OL-16599-01 Cisco Nexus 5000 Series Command Reference 6-13