HP Cisco MDS 9216 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 597
fcroute
View all HP Cisco MDS 9216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 597 highlights
Chapter 8 Fibre Channel Commands Send comments to [email protected] fcroute fcroute To configure Fibre Channel routes and to activate policy routing, use the fcroute command. To remove a configuration or revert to factory defaults, use the no form of the command. fcroute {fcid [network-mask] interface {fc slot/port | san-port-channel port | vfc vfc-id} domain domain-id {metric number | remote | vsan vsan-id}} no fcroute {fcid network-mask interface {fc slot/port | san-port-channel port | vfc vfc-id} domain domain-id {metric number | remote | vsan vsan-id}} Syntax Description fcid network-mask interface fc slot/port san-port-channel port vfc vfc-id domain domain-id metric number remote vsan vsan-id Specifies the FC ID. The format is 0xhhhhhh. Specifies the network mask of the FC ID. The format is 0x0 to 0xffffff. Specifies an interface. Specifies a Fibre Channel interface. Specifies a SAN port channel interface. Specifies a virtual Fibre Channel interface. Specifies the route for the domain of the next hop switch. The range is 1 to 239. Specifies the cost of the route. The range is 1 to 65535. Default cost is 10. Configures the static route for a destination switch remotely connected. Specifies a VSAN ID. The range is 1 to 4093. Command Default None Command Modes Configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines Use this command to assign forwarding information to the switch and to activate a preferred path route map. Examples The following example specifies the Fibre Channel interface and the route for the domain of the next hop switch for VSAN 2: switch(config)# fcroute 0x111211 interface fc3/1 domain 3 vsan 2 The following example specifies the SAN port channel interface and the route for the domain of the next hop switch for VSAN 4: switch(config)# fcroute 0x111211 interface san-port-channel 1 domain 3 vsan 4 OL-16599-01 Cisco Nexus 5000 Series Command Reference 8-63