HP Cisco MDS 9216 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 723
show flogi
View all HP Cisco MDS 9216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 723 highlights
Chapter 9 Fibre Channel Show Commands show flogi Send comments to [email protected] show flogi To list all the fabric login (FLOGI) sessions through all interfaces across all VSANs, use the show flogi command. show flogi {auto-area-list} | database {fcid fcid-id | interface {fc slot/port | vfc vfc-id} | vsan vsan-id} Syntax Description auto-area-list database fcid fcid-id interface fc slot/port vfc vfc-id vsan vsan-id Displays the list of Organizational Unit Identifiers (OUIs) that are allocated areas. Displays information about FLOGI sessions. Displays FLOGI database entries based on the FCID allocated. The format is 0xhhhhhh. Displays FLOGI database entries based on the logged in interface. Specifies the Fibre Channel or virtual Fibre Channel interface by slot and port number. Specifies a virtual Fibre Channel interface. Displays FLOGI database entries based on the VSAN ID. The range is 1 to 4093. Command Default None Command Modes EXEC mode. Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines The output of this command is sorted by interface numbers and then by VSAN IDs. In a Fibre Channel fabric, each host or disk requires an FCID. Use the show flogi database command to verify if a storage device is displayed in the fabric login (FLOGI) table as in the examples below. If the required device is displayed in the FLOGI table, the fabric login is successful. Examine the FLOGI database on a switch that is directly connected to the host HBA and connected ports. Examples The following example displays details on the FLOGI database: switch# show flogi database The following example displays the FLOGI interface: switch# show flogi database interface fc 2/3 OL-16599-01 Cisco Nexus 5000 Series Command Reference 9-29