HP Cisco MDS 9216 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 572
fabric-binding activate
View all HP Cisco MDS 9216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 572 highlights
fabric-binding activate Chapter 8 Fibre Channel Commands Send comments to [email protected] fabric-binding activate To activate fabric binding in a VSAN, use the fabric-binding activate command. To disable this feature, use the no form of the command. fabric-binding activate vsan vsan-id [force] no fabric-binding activate vsan vsan-id Syntax Description vsan vsan-id force Specifies the VSAN. The ID of the VSAN is from 1 to 4093. (Optional) Forces fabric binding activation. Command Default Disabled. Command Modes Configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Examples The following example activates the fabric binding database for the specified VSAN: switch(config)# fabric-binding activate vsan 1 The following example deactivates the fabric binding database for the specified VSAN: switch(config)# no fabric-binding activate vsan 10 The following example forcefully activates the fabric binding database for the specified VSAN switch(config)# fabric-binding activate vsan 3 force The following example reverts to the previously configured state or to the factory default (if no state is configured): switch(config)# no fabric-binding activate vsan 1 force Related Commands Command fabric-binding database fabric-binding enable Description Configures a fabric-binding database. Enables fabric-binding. 8-38 Cisco Nexus 5000 Series Command Reference OL-16599-01