HP Cisco MDS 9216 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 429
server
View all HP Cisco MDS 9216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 429 highlights
Chapter 6 Security Commands Send comments to [email protected] server server To add a server to a RADIUS or TACACS+ server group, use the server command. To delete a server from a server group, use the no form of this command. server {ipv4-address | ipv6-address | hostname} no server {ipv4-address | ipv6-address | hostname} Syntax Description ipv4-address ipv6-address hostname Server IPv4 address in the A.B.C.D format. Server IPv6 address in the X:X:X::X format. Server name. The maximum length is 256 characters. Command Default None Command Modes RADlUS server group configuration TACACS+ server group configuration Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines You can configure up to 64 servers in a server group. Use the aaa group server radius command to enter RADIUS server group configuration mode or aaa group server tacacs+ command to enter TACACS+ server group configuration mode. If the server is not found, use the radius-server host command or tacacs-server host command to configure the server. Note You must use the feature tacacs+ command before you configure TACACS+. Examples This example shows how to add a server to a RADIUS server group: switch(config)# aaa group server radius RadServer switch(config-radius)# server 10.10.1.1 This example shows how to delete a server from a RADIUS server group: switch(config)# aaa group server radius RadServer switch(config-radius)# no server 10.10.1.1 OL-16599-01 Cisco Nexus 5000 Series Command Reference 6-95