HP Cisco MDS 9216 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 518

show logging onboard Chapter 7 System Management Commands Send comments to [email protected] show logging onboard To display the onboard logging information based on the error type, use the show logging onboard command. show logging onboard {boot-uptime | device-version | endtime | environmental-history | exception-log | kernel-trace | obfl-history | obfl-logs | stack-trace | starttime | status} [> file | | type] Syntax Description boot-uptime Displays the OBFL boot and uptime information. device-version Displays the OBFL device version information. endtime Displays the OBFL logs until the specified end time.in the following format: mm/dd/yy-HH:MM:SS environmental-history Displays the OBFL environmental history. exception-log Displays the OBFL exception log. kernel-trace Displays the OBFL kernel trace information. obfl-history Displays the OBFL history information. obfl-logs Displays the OBFL technical support log information. stack-trace Displays the OBFL kernel stack trace information. starttime Displays the OBFL logs from the specified start time in the following format: mm/dd/yy-HH:MM:SS status Displays the OBFL status enable or disable. > file (Optional) Redirects the output to a file. See the "Usage Guidelines" section for additional information. | type (Optional) Filters the output. See the "Usage Guidelines" section for additional information. Command Default None Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines The date and time arguments for the starttime and endtime keywords are entered as the date month/day/year (mm/dd/yy), followed by a hyphen, and the time in 24-hour format in hours:minutes:seconds (HH:MM:SS). For example: • starttime 03/17/08-15:01:57 • endtime 03/18/08-15:04:57 The valid values for file are as follows: 7-32 Cisco Nexus 5000 Series Command Reference OL-16599-01