HP Deskjet 610/612c (English) Online Manual - Not Orderable - Page 24

Next, align the cartridges, Now, print your photograph, for the Paper Type. See Finding

Page 24 highlights

2 Pull the top of the black print cartridge toward you until it pops loose. Then lift it from its cradle. 3 Store the black print cartridge in the print cartridge storage container or other airtight container. 4 Place the photo cartridge into the now-empty cartridge cradle, and push it back into position. You hear a click when the cartridge sits snugly in its cradle. 5 Close the printer's top cover. The cradles return to their home position on the right side of the printer and the Resume light stops flashing. Next, align the cartridges: • If you're using a new cartridge, align the cartridges. • Use plain paper when aligning the cartridges to save your photo paper. Now, print your photograph: 1 In the Setup tab of the HP print settings dialog box, click HP Photo Paper or HP Premium Photo Paper for the Paper Type. (See "Finding the HP print settings box" on page 6.) 2 Load the paper as you would for normal printing. Make sure you insert the paper glossy-side down. 3 Print the document. For the best results, remove each sheet promptly after printing, and allow it to dry glossy-side up. (The drying time will vary depending on the humidity.) After printing, remember to: 1 Remove the photo cartridge from of the printer and replace it with the black print cartridge. Store the photo cartridge in the storage container. 2 If you used any special paper, remove it from the lower (IN) tray and replace it with plain paper. 3 Align the print cartridges. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

24
2
Pull the top of the black print cartridge toward you until it pops
loose. Then lift it from its cradle.
3
Store the black print cartridge in the print cartridge storage
container or other airtight container.
4
Place the photo cartridge into the now-empty cartridge cradle, and
push it back into position.
You hear a click when the cartridge sits snugly in its cradle.
5
Close the printer’s top cover.
The cradles return to their home position on the right side of the
printer and the Resume
light stops flashing.
Next, align the cartridges:
If you’re using a new cartridge, align the cartridges.
Use plain paper when aligning the cartridges to save your photo
paper.
Now, print your photograph:
1
In the
Setup
tab of the HP print settings dialog box, click
HP Photo
Paper
or
HP Premium Photo Paper
for the Paper Type. (See “Finding
the HP print settings box” on page 6.)
2
Load the paper as you would for normal printing.
Make sure you insert the paper glossy-side down.
3
Print the document.
For the best results, remove each sheet promptly after printing, and
allow it to dry glossy-side up. (The drying time will vary depending
on the humidity.)
After printing, remember to:
1
Remove the photo cartridge from of the printer and replace it with
the black print cartridge. Store the photo cartridge in the storage
container.
2
If you used any special paper, remove it from the lower (IN) tray
and replace it with plain paper.
3
Align the print cartridges.